Hastelloy™ C-4 Material Property Data Sheet
Do you need custom fasteners created with Hastelloy™ C-4? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Hastelloy™ C-4 Bar Stock we have available to meet your needs.
| |
| |
Hastelloy® C-4 alloy, all-weld metal, as welded, GTAW, tested at RT
Subcategory: Metal; Nickel Base; Superalloy
Key Words: ASME SB-622, ASME SB-626, UNS N06455, ASME SB-574, ASME SB-575, ASME SB-619, nickel alloy
| Component | Wt. % |  | | | C | Max 0.01 | | | Co | Max 2 | | | Cr | 14 - 18 | | | Fe | Max 3 | |
| | Component | Wt. % |  | | | Mn | Max 1 | | | Mo | 14 - 17 | | | Ni | 58 | | | P | Max 0.025 | |
| | Component | Wt. % | | |
| S | Max 0.01 | | | Si | Max 0.08 | | | Ti | Max 0.7 | |
|
Material Notes: Nickel content to balance. High temperature stability even after aging in the 650-1040°C (1200-1900°F) range as evidenced by good ductility and corrosion resistance. Resists the formation of grain-boundary precipitates and is therefore suitable for use in most chemical process applications in the as-welded condition. C-4 resists stress-corrosion cracking and oxidizing atmospheres up to 1040°C (1900°F). It has exceptional resistance to hot contaminated mineral acids, solvents, chlorine and chlorine-contaminated media (organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, seawater and brine solutions. Data provided by the manufacturer, Haynes International, Inc.
| Physical Properties | Metric | English | Comments |
|
| Density | 8.64 g/cc | 0.312 lb/in³ | at RT |
Mechanical Properties |
|
| Tensile Strength, Ultimate | 738 MPa | 107000 psi | |
| Tensile Strength, Yield | 492 MPa | 71400 psi | at 0.2% offset |
| Elongation at Break | 42 % | 42 % | in 50.8 mm |
| Modulus of Elasticity | 207 GPa | 30000 ksi | 93°C |
| Modulus of Elasticity | 211 GPa | 30600 ksi | RT |
| Modulus of Elasticity at Elevated Temperature | 141 GPa | 20500 ksi | 982°C |
| Modulus of Elasticity at Elevated Temperature | 152 GPa | 22000 ksi | 871°C |
| Modulus of Elasticity at Elevated Temperature | 162 GPa | 23500 ksi | 760°C |
| Modulus of Elasticity at Elevated Temperature | 171 GPa | 24800 ksi | 649°C |
| Modulus of Elasticity at Elevated Temperature | 179 GPa | 26000 ksi | 538°C |
| Modulus of Elasticity at Elevated Temperature | 187 GPa | 27100 ksi | 427°C |
| Modulus of Elasticity at Elevated Temperature | 194 GPa | 28100 ksi | 316°C |
| Modulus of Elasticity at Elevated Temperature | 201 GPa | 29200 ksi | 204°C |
Electrical Properties |
|
| Electrical Resistivity | 0.000125 ohm-cm | 0.000125 ohm-cm | 23°C |
| Electrical Resistivity at Elevated Temperature | 0.000125 ohm-cm | 0.000125 ohm-cm | 100°C (212°F) |
| Electrical Resistivity at Elevated Temperature | 0.000126 ohm-cm | 0.000126 ohm-cm | 200°C (390°F) |
| Electrical Resistivity at Elevated Temperature | 0.000127 ohm-cm | 0.000127 ohm-cm | 300°C (570°F) |
| Electrical Resistivity at Elevated Temperature | 0.000128 ohm-cm | 0.000128 ohm-cm | 400°C (750°F) |
| Electrical Resistivity at Elevated Temperature | 0.000129 ohm-cm | 0.000129 ohm-cm | 500°C (930°F) |
| Electrical Resistivity at Elevated Temperature | 0.000132 ohm-cm | 0.000132 ohm-cm | 600°C (1110°F) |
Thermal Properties |
|
| CTE, linear 20°C | 10.8 µm/m-°C | 6 µin/in-°F | |
| CTE, linear 250°C | 11.9 µm/m-°C | 6.61 µin/in-°F | 20-204°C (68-400°F) |
| CTE, linear 500°C | 12.6 µm/m-°C | 7 µin/in-°F | 20-316°C (68-600°F) |
| CTE, linear 500°C | 13.3 µm/m-°C | 7.39 µin/in-°F | 20-427°C (68-800°F) |
| CTE, linear 500°C | 13.3 µm/m-°C | 7.39 µin/in-°F | 20-538°C (68-1000°F) |
| CTE, linear 1000°C | 13.5 µm/m-°C | 7.5 µin/in-°F | 20-649°C (68-1200°F) |
| CTE, linear 1000°C | 14.4 µm/m-°C | 8 µin/in-°F | 20-760°C (68-1400°F) |
| CTE, linear 1000°C | 14.9 µm/m-°C | 8.28 µin/in-°F | 24-871°C (75-1600°F) |
| CTE, linear 1000°C | 15.7 µm/m-°C | 8.72 µin/in-°F | 20-982°C (68-1800°F) |
| Heat Capacity | 0.406 J/g-°C | 0.097 BTU/lb-°F | 0°C (32°F) |
| Heat Capacity at Elevated Temperature | 0.427 J/g-°C | 0.102 BTU/lb-°F | 100°C (212°F) |
| Heat Capacity at Elevated Temperature | 0.448 J/g-°C | 0.107 BTU/lb-°F | 200°C (390°F) |
| Heat Capacity at Elevated Temperature | 0.465 J/g-°C | 0.111 BTU/lb-°F | 300°C (570°F) |
| Heat Capacity at Elevated Temperature | 0.477 J/g-°C | 0.114 BTU/lb-°F | 400°C (750°F) |
| Heat Capacity at Elevated Temperature | 0.49 J/g-°C | 0.117 BTU/lb-°F | 500°C (930°F) |
| Heat Capacity at Elevated Temperature | 0.502 J/g-°C | 0.12 BTU/lb-°F | 600°C (1110°F) |
| Thermal Conductivity | 10.1 W/m-K | 70.1 BTU-in/hr-ft²-°F | 23°C (73°F) |
| Thermal Conductivity at Elevated Temperature | 11.4 W/m-K | 79.1 BTU-in/hr-ft²-°F | 100°C (212°F) |
| Thermal Conductivity at Elevated Temperature | 13.2 W/m-K | 91.6 BTU-in/hr-ft²-°F | 200°C (390°F) |
| Thermal Conductivity at Elevated Temperature | 15 W/m-K | 104 BTU-in/hr-ft²-°F | 300°C (570°F) |
| Thermal Conductivity at Elevated Temperature | 16.7 W/m-K | 116 BTU-in/hr-ft²-°F | 400°C (750°F) |
| Thermal Conductivity at Elevated Temperature | 18.4 W/m-K | 128 BTU-in/hr-ft²-°F | 500°C (930°F) |
| Thermal Conductivity at Elevated Temperature | 20.5 W/m-K | 142 BTU-in/hr-ft²-°F | 600°C (1110°F) |
|
|
 |
This information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
The contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.
|
 |
|
|