Inconel 25-6MO

Do you need custom fasteners created with Inconel™ 25-6MO? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel 25-6MO Bar Stock we have available to meet your needs.

Component Wt. %
Nickela 24.0-26.0%
Chromium 19.0-21.0%
Copper 0.5-1.5%
Carbon 0.02% max
Phosphorus 0.03% max
Silicon 0.5% max
Iron Balance*
Molybdenum 6.0-7.0%
Nitrogen 0.15-0.25%
Manganese 2.0% max
Sulfur 0.03% max

 

Material Notes:

INCOLOY® alloy 25-6MO (UNS N08926/W.
Nr. 1.4529, formerly UNS N08925) is a
super-austenitic stainless steel containing
6% molybdenum and enhanced by an
addition of nitrogen. The nickel and
chromium contents of this alloy make it
resistant to a wide range of corrosive
environments. The alloy is especially resistant
to non-oxidizing acids such as sulfuric and
phosphoric. The high molybdenum content
and nitrogen provide resistance to pitting and
crevice corrosion, while copper enhances
resistance to sulfuric acid.

 

Physical Properties Metric English Comments
Density 8.03 g/cm3 0.290 lb/in³
Melting Range 2410-2550 oF 1320-1400 oC
Mechanical Properties
Tensile Strength 100 Ksi 690 MPa
Elongation at Break 42 % Elongation in 2 in (50
mm) or 4D min, %
Hardness Rb 86

 

This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2014 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.