Phosphorous Bronze 510 Material Property Data Sheet
Do you need custom fasteners created with Phosphorous Bronze 510? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Phosphorous Bronze 510 Bar Stock we have available to meet your needs.
| |
Phosphor bronze 8% C, UNS C52100, H02 Temper rod
Subcategory: Bronze; Copper Alloy; Metal; Nonferrous Metal
Key Words: CDA 521, PB104, ISO CuSn8P
| Component | Wt. % |  | | | Cu | 90.5 - 92.8 | | | Fe | Max 0.1 | | | P | 0.03 - 0.35 | | | Pb | Max 0.05 | | | Sn | 7 - 9 | | | Zn | Max 0.2 | |
|
Material Notes:
Good to excellent corrosion resistance. Good cold workability for blanking, drawing, forming and bending, shearing and stamping. Applications: more severe service conditions than C51000. Trace content of Phosphorus.Test specimen: rod - 13mm diameter.
| Physical Properties | Metric | English | Comments |
|
| Density | 8.8 g/cc | 0.318 lb/in³ | at 20°C (68°F) |
Mechanical Properties |
|
| Hardness, Rockwell B | 85 | 85 | |
| Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
| Tensile Strength, Yield | 450 MPa | 65300 psi | |
| Elongation at Break | 33 % | 33 % | in 50 mm |
| Modulus of Elasticity | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.341 | 0.341 | |
| Machinability | 20 % | 20 % | UNS C36000 (free-cutting brass) = 100% |
| Shear Modulus | 41 GPa | 5950 ksi | |
Electrical Properties |
|
| Electrical Resistivity | 1.33e-005 ohm-cm | 1.33e-005 ohm-cm | at 20°C (68°F) |
Thermal Properties |
|
| CTE, linear 250°C | 18.2 µm/m-°C | 10.1 µin/in-°F | from 20-300°C (68-570°F) |
| Heat Capacity | 0.38 J/g-°C | 0.0908 BTU/lb-°F | |
| Thermal Conductivity | 62 W/m-K | 430 BTU-in/hr-ft²-°F | at 20°C (68°F) |
| Melting Point | 880 - 1025 °C | 1620 - 1880 °F | |
| Solidus | 880 °C | 1620 °F | |
| Liquidus | 1025 °C | 1880 °F | |
Processing Properties |
|
| Annealing Temperature | 475 - 675 °C | 887 - 1250 °F | |
|
|
|
This information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
The contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.
|
|
|
