Material Category: Nickel Alloys

Nickel 200

Do you need custom fasteners created with 13-8 MO? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the 13-8 MO Bar Stock we have available to meet your needs.

Special Metals Nickel 200

Subcategory: Metal; Nickel Alloy; Nonferrous Metal; Pure Metallic Element Key Words: ASME SB-160 – SB-163, Boiler Code Sections III, VIII, IX; DIN 17740, 17750-17754, Nickel, Ni, UNS N02200; BS 3072-3076 (NA11); ASTM B 160 – B 163, B 725, B 730, Werkstoff Nr. 2.4060, 2.4066

Component Wt. %
C Max 0.15
Cu Max 0.25
Fe Max 0.4
Mn Max 0.35
Ni Min 99
S Max 0.01
Si Max 0.35

Material Notes: Nickel content above includes cobalt. Commercially pure (99.6%) wrought nickel with good mechanical properties and resistance to a range of corrosive media. Good thermal, electrical, and magnetostrictive properties. Ferromagnetic. Used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers, and alkalis. Standard product forms are round, flats, pipe, tube, plate, sheet, forging stock, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties Metric English Comments
Density 8.89 g/cc 0.321 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 462 MPa 67000 psi Annealed. Value at room temperature. Value at 300°C is 475 MPa.
Tensile Strength, Yield 148 MPa 21500 psi Annealed. Value at room temperature; 0.2% offset. Value at 300°C is 120 MPa.
Elongation at Break 45 % 45 % Annealed. Value at room temperature. Value at 300°C is 48%.
Electrical Properties
Electrical Resistivity 9.6e-006 ohm-cm 9.6e-006 ohm-cm
Curie Temperature 360 °C 680 °F
Thermal Properties
CTE, linear 20°C 13.3 µm/m-°C 7.39 µin/in-°F 20-100°C
Heat Capacity 0.456 J/g-°C 0.109 BTU/lb-°F
Thermal Conductivity 70.2 W/m-K 487 BTU-in/hr-ft²-°F
Melting Point 1435 – 1446 °C 2620 – 2630 °F
Solidus 1435 °C 2620 °F
Liquidus 1446 °C 2630 °F

This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2014 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.

Monel K-500

Do you need custom fasteners created with Monel™ K-500? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Monel™ K-500 Bar Stock we have available to meet your needs.

Special Metals MONEL™ Alloy K-500

Subcategory: Copper Alloy; Metal; Nickel Alloy; Superalloy Key Words: DIN 17743, 17752, 17754; Werkstoff Nr. 2.4375; QQ-N-286; NACE MR -01-75, Monel Nickel-Copper Alloy, UNS N05500; BS 3072 – 3076 (NA18); ASME Boiler Code Section VIII; SAE AMS 4676; MIL-N-24549

Component Wt. %
Al 2.3 – 3.15
C Max 0.25
Cu 27 – 33
Fe Max 2
Mn Max 1.5
Ni Min 63
S Max 0.01
Si Max 0.5
Ti 0.35 – 0.85

Material Notes: A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to under -150°F (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.44 g/cc 0.305 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 1100 MPa 160000 psi Precipitation Hardened. Value at room temperature. Value at 425°C is 860 MPa.
Tensile Strength, Yield 790 MPa 115000 psi Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 425°C is 630 MPa.
Elongation at Break 25 % 25 % Precipitation Hardened. Value at room temperature. Value at 425°C is 12%.
Electrical Properties
Electrical Resistivity 6.15e-005 ohm-cm 6.15e-005 ohm-cm
Magnetic Permeability 1.002 1.002 at 200 oersted (15.9 kA/m)
Curie Temperature -65 °C -85 °F
Thermal Properties
CTE, linear 20°C 13.7 µm/m-°C 7.61 µin/in-°F 20-100°C
Heat Capacity 0.419 J/g-°C 0.1 BTU/lb-°F
Thermal Conductivity 17.5 W/m-K 121 BTU-in/hr-ft²-°F
Melting Point 1315 – 1350 °C 2400 – 2460 °F
Solidus 1315 °C 2400 °F
Liquidus 1350 °C 2460 °F

 

Monel 405

Do you need custom fasteners created with Monel™ 405? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Monel™ 405 Bar Stock we have available to meet your needs.

Special Metals MONEL™ Alloy 450

Subcategory: Copper Alloy; Metal; Nickel Alloy; Superalloy Key Words: ASME SB-111, SB-171, SB-359, SB-395, SB-466, SB-467, SB-543, Boiler Code Sections III, IV, VIII, IX; SAE J461, J463, MIL-T-15005, MIL-C-15726, MIL-T-16420, MIL-T-22214, Monel Nickel-Copper Alloy, UNS C71500; CDA 715; ASTM B 111, B 122, B 151, B 171, B 359, B 395, B 432, B 466, B 467, B 543, B 552

Component Wt. %
Cu 66
Fe 0.4 – 1
Mn Max 1
Ni 29 – 33
P Max 0.02
Pb Max 0.05
S Max 0.02
Zn Max 1

Material Notes: Nickel content above includes cobalt; copper content as remainder. A copper-nickel alloy of the 70-30 type having superior weldability. It is resistant to corrosion and bio-fouling in sea water, has good fatigue strength, and has relatively high thermal conductivity. Used for sea-water condensers, condenser plates, distiller tubes, evaporator and heat exchanger tubes, and salt-water piping. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.91 g/cc 0.322 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 385 MPa 55800 psi Annealed. Value at room temperature. Value at 425°C is 280 MPa.
Tensile Strength, Yield 165 MPa 23900 psi Annealed. Value at room temperature; 0.2% offset. Value at 425°C is 100 MPa.
Elongation at Break 56 % 56 % Annealed. Value at room temperature. Value at 425°C is 40%.
Electrical Properties
Electrical Resistivity 4.12e-005 ohm-cm 4.12e-005 ohm-cm
Thermal Properties
CTE, linear 20°C 15.5 µm/m-°C 8.61 µin/in-°F 20-100°C
Heat Capacity 0.38 J/g-°C 0.0908 BTU/lb-°F
Thermal Conductivity 29.4 W/m-K 204 BTU-in/hr-ft²-°F
Melting Point 1170 – 1240 °C 2140 – 2260 °F
Solidus 1170 °C 2140 °F
Liquidus 1240 °C 2260 °F

 

Monel 400

Do you need custom fasteners created with Monel 400? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Monel 400 Bar Stock we have available to meet your needs.

Special Metals MONEL™ Alloy 400

Subcategory: Copper Alloy; Metal; Nickel Alloy; Superalloy Key Words: AFNOR NU30; SAE AMS 4544, 4574, 4575, 4675, 4730, 4731, 7233; DIN 17743, 17750 – 17754, ASME SB-127, SB-163 – SB-165, SB-564, Boiler Code Sections III, IV, VIII, IX; AECMA Pr EN 2305, Monel Nickel-Copper Alloy, UNS N04400; BS 3072-3076 (NA 13); ASTM B 127, B 163 – B 165, B 564, Werkstoff Nr. 2.4360, 2.4361; VdTUV 263; MIL-T-1368, MIL-T-23520, MIL-N-24106; QQ-N-281; NACE MR-01-75

Component Wt. %
C Max 0.3
Cu 28 – 34
Fe Max 2.5
Mn Max 2
Ni Min 63
S Max 0.024
Si Max 0.5

Material Notes: Nickel content above includes cobalt. A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalis. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties Metric English Comments
Density 8.8 g/cc 0.318 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 550 MPa 79800 psi Annealed. Value at room temperature. Value at 425°C is 450 MPa.
Tensile Strength, Yield 240 MPa 34800 psi Annealed. Value at room temperature; 0.2% offset. Value at 425°C is 170 MPa.
Elongation at Break 48 % 48 % Annealed. Value at room temperature. Value at 425°C is 50%.
Electrical Properties
Electrical Resistivity 5.47e-005 ohm-cm 5.47e-005 ohm-cm
Curie Temperature 35 °C 95 °F Range is 20-50°C
Thermal Properties
CTE, linear 20°C 13.9 µm/m-°C 7.72 µin/in-°F 20-100°C
Heat Capacity 0.427 J/g-°C 0.102 BTU/lb-°F
Thermal Conductivity 21.8 W/m-K 151 BTU-in/hr-ft²-°F
Melting Point 1300 – 1350 °C 2370 – 2460 °F
Solidus 1300 °C 2370 °F
Liquidus 1350 °C 2460 °F

 

Inconel X750

Do you need custom fasteners created with Inconel™ X750? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ X750 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy X-750

Subcategory: Metal; Nickel Base; Superalloy Key Words: MIL-N-7786, MIL-N-8550, MIL-S-23192, MIL-N-24114; NACE MR-01-75; AFNOR NC 15 FeT, SAE AMS 5542, 5582, 5583, 5598, 5667 – 5671, 5698, 5699, 5747, 7246, UNS N07750; BS HR505; ASTM B 637; ASME SB-637, Boiler Code Section III; Werkstoff Nr. 2.4669

Component Wt. %
Al 0.4 – 1
C Max 0.08
Co Max 1
Cr 14 – 17
Cu Max 0.5
Fe 5 – 9
Mn Max 1
Nb 0.7 – 1.2
Ni Min 70
S Max 0.01
Si Max 0.5
Ti 2.25 – 2.75

Material Notes: Nickel content above includes cobalt; Nb content above includes Ta. A nickel-chromium alloy similar to INCONEL alloy 600 but made precipitation hardenable by additions of aluminum and titanium. The alloy has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to about 1300°F (700°C). Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures. Standard product forms are round, flats, extruded section, forging stock, plate, sheet, strip, pipe, tube, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.28 g/cc 0.299 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 1250 MPa 181000 psi Precipitation Hardened. Value at room temperature. Value at 550°C is 1120 MPa.
Tensile Strength, Yield 850 MPa 123000 psi Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 550°C is 760 MPa.
Elongation at Break 30 % 30 % Precipitation Hardened. Value at room temperature. Value at 550°C is 22%.
Electrical Properties
Electrical Resistivity 0.000122 ohm-cm 0.000122 ohm-cm
Magnetic Permeability 1.0035 1.0035 at 200 oersted (15.9 kA/m)
Curie Temperature -125 °C -193 °F
Thermal Properties
CTE, linear 20°C 12.6 µm/m-°C 7 µin/in-°F 20-100°C
Heat Capacity 0.431 J/g-°C 0.103 BTU/lb-°F
Thermal Conductivity 12 W/m-K 83.3 BTU-in/hr-ft²-°F
Melting Point 1390 – 1430 °C 2530 – 2610 °F
Solidus 1390 °C 2530 °F
Liquidus 1430 °C 2610 °F

 

Inconel 925

Do you need custom fasteners created with Inconel™ 925? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ 925 Bar Stock we have available to meet your needs.

Special Metals INCOLOY® Alloy 925

Subcategory: Metal; Nickel Base; Superalloy

Key Words: UNS N09925; NACE MR-01-75

Component Wt. %
Al 0.3
C 0.01
Cr 21
Cu 1.8
Fe 28
Mo 3
Ni 44
Ti 2.1

 

Material Notes:
A precipitation-hardenable nickel-iron-chromium alloy with additions of molybdenum and copper. It combines the high strength of a precipitation-hardenable alloy with the excellent corrosion resistance of INCOLOY alloy 825. The alloy has outstanding resistance to general corrosion, pitting, crevice corrosion, and stress-corrosion cracking in many aqueous environments including those containing sulfides and chlorides. Used for surface and down-hole hardware in sour gas wells and for oil-production equipment. Standard product forms are round, flats, forging stock, pipe, tube, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.05 g/cc 0.291 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 1210 MPa 175000 psi Precipitation Hardened. Value at room temperature. Value at 550°C is 970 MPa.
Tensile Strength, Yield 810 MPa 117000 psi Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 550°C is 700 MPa.
Elongation at Break 24 % 24 % Precipitation Hardened. Value at room temperature. Value at 550°C is 25%.
Electrical Properties
Electrical Resistivity 0.000117 ohm-cm 0.000117 ohm-cm
Magnetic Permeability 1.001 1.001 at 200 oersted (15.9 kA/m)
Thermal Properties
CTE, linear 20°C 13.2 µm/m-°C 7.33 µin/in-°F 20-100°C
Heat Capacity 0.435 J/g-°C 0.104 BTU/lb-°F
Melting Point 1311 – 1366 °C 2390 – 2490 °F
Solidus 1311 °C 2390 °F
Liquidus 1366 °C 2490 °F

Inconel 825

Do you need custom fasteners created with Inconel™ 825? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ 825 Bar Stock we have available to meet your needs.

Inconel™ 825

Component Wt. %
Nickel + Cobalt 38.0 – 46.0
Cobalt 2.00
Chromium 19.5 – 23.5
Component Wt. %
Copper 1.50 – 3.00
Iron 22.0
Silicon 0.50
Component Wt. %
Manganese 1.00
Carbon 0.05
Aluminum 0.20
Physical Properties °F British Units °C Metric Units
Density Room 0.294 lb./in.3 Room 8.14 g/cm3
Dynamic Modulus of Elasticity Room 28.0 x 106 psi Room 193 GPa
Mechanical Properties
Electrical Resistivity Room 44.4 microhm-in. Room 1.13 microhm-m
200 44.9 microhm-in. 93 1.14 microhm-m
400 46.5 microhm-in. 204 1.18 microhm-m
600 47.6 microhm-in. 316 1.21 microhm-m
800 49.2 microhm-in. 427 1.25 microhm-m
Mean Coefficient ofThermal Expansion 80-200 7.9 microinches/in.-°F 27-93 14.0 x 10-6 m/m-K
80-400 8.3 microinches/in.-°F 27-204 14.9 x 10-6 m/m-K
80-600 8.5 microinches/in.-°F 27-316 15.3 x 10-6 m/m-K
80-800 8.7 microinches/in.-°F 27-427 15.7 x 10-6 m/m-K
Thermal Properties
Thermal Conductivity Room 77 Btu-in./ft.2-hr.-°F Room 11.1 W/m-K
200 85 Btu-in./ft.2-hr.-°F 93 12.3 W/m-K
400 98 Btu-in./ft.2-hr.-°F 2040 14.1 W/m-K
600 110 Btu-in./ft.2-hr.-°F 316 15.9 W/m-K
800 120 Btu-in./ft.2-hr.-°F 427 17.3 W/m-K

References are available for this material.

Inconel 800/800H

Do you need custom fasteners created with Inconel™ 800/800H? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ 800/800H Bar Stock we have available to meet your needs.

Typical applications for alloy 800 and 800H are – Heat exchangers and process piping; carburizing fixtures and retorts; furnace components; electric range heating-element sheathing; extruded tubing for ethylene and steam methane reforming furnaces; ammonia effluent coolers.

Inconel™ ALLOY 800/800H

Inconel™ 800 Inconel™ 800H
Component Min Max Min Max
Nickel + Cobalt 30.0 30.0 30.0 35.0
Cobalt — 2.00 — 2.00
Chromium 19.0 23.0 19.0 23.0
Copper — 0.75 — 0.75
Iron Balance Balance
Silicon — 1.00 — 1.00
Manganese — 1.50 — 1.50
Carbon — 0.10 0.05 0.10
Aluminum 0.15 0.60 0.15 0.60
Titanium 0.15 0.60 0.15 0.60
Sulfur — 0.015 — 0.015

*Maximum

aAs balance
Physical Properties °F British Units °C Metric Units
Density Room 0.287 lb./in.3 Room 7.95 g/cm3
Dynamic Modulus of Elasticity Room 28.5 x 106 psi Room 196 GPa
Mechanical Properties
Electrical Resistivity 70 38.9 microhm-in. 21 0.989 microhm-m
200 40.6 microhm-in. 93 10.3 microhm-m
400 43.0 microhm-in. 204 1.09 microhm-m
600 44.7 microhm-in. 316 1.13 microhm-m
800 46.1 microhm-in. 427 1.17 microhm-m
Mean Coefficient ofThermal Expansion 70-200 7.9 microinches/in.-°F 21-93 14.2 x 10-6 m/m-K
70-400 8.8 microinches/in.-°F 21-204 15.8 x 10-6 m/m-K
70-600 9.0 microinches/in.-°F 21-316 16.2 x 10-6 m/m-K
70-800 9.2 microinches/in.-°F 21-427 16.6 x 10-6 m/m-K
Thermal Properties
Thermal Conductivity 70 80 Btu-in./ft.2-hr.-°F 21 11.5 W/m-K
200 89 Btu-in./ft.2-hr.-°F 93 12.8 W/m-K
400 103 Btu-in./ft.2-hr.-°F 204 14.8 W/m-K
600 115 Btu-in./ft.2-hr.-°F 316 16.6 W/m-K
800 127 Btu-in./ft.2-hr.-°F 427 18.3 W/m-K

Inconel 718

Do you need custom Iconel fasteners created with Inconel 718? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for Iconel 718 bolts and specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the material properties and technical specifications of the Inconel 718 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 718

Subcategory: Metal; Nickel Base; Superalloy

Key Words: IN718, INCONEL 718, AFNOR NC 19 Fe Nb, UNS N07718; ASTM B637, B670; ASME Boiler Code Sections I, III; AMS 5589, AMS 5590, AMS 5596, AMS 5597, AMS 5662, AMS 5663, AMS 5664, AMS 5832, Werkstoff Nr. 2.4668; WL Nr. 2.4668; MIL-N-24469; NACE MR-01-75; AECMA Pr EN 2404, 2405, 2407, 2408, 2952, 2961, 3219

Component Wt. %
Al 0.2 – 0.8
B Max 0.006
C Max 0.08
Co Max 1
Cr 17 – 21
Cu Max 0.3
Fe 17
Mn Max 0.35
Mo 2.8 – 3.3
Nb 4.75-5.5
Ni 50 – 55
P Max 0.015
S Max 0.015
Si Max 0.35
Ti 0.65 – 1.15

 

Material Notes:
Nickel content above includes cobalt. Iron content as remainder. Developed in the early 1960’s, IN718 is still considered the material of choice for the majority of aircraft engine components with service temperatures below 1200°F (650°C). Inconel 718 is a precipitation-hardenable nickel-chromium alloy containing also significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weldability including resistance to postweld cracking. The alloy has excellent creep-rupture strength at temperatures to 1300°F (700°C).

Applications: Aerospace, gas turbines, rocket motors, spacecraft, space shuttles, nuclear reactors, pumps, turbo pump seals, and tooling.

Forms: round, flat, extruded section, pipe, tube, forging stock, plate, sheet, strip and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties Metric English Comments
Density 8.19 g/cc 0.296 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 1375 MPa 199000 psi Precipitation Hardened. Value at room temperature. Value at 650°C is 1100 MPa.
Tensile Strength, Yield 1100 MPa 160000 psi Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 650°C is 980 MPa.
Elongation at Break 25 % 25 % Precipitation Hardened. Value at room temperature. Value at 650°C is 18%.
Electrical Properties
Electrical Resistivity 0.000125 ohm-cm 0.000125 ohm-cm
Magnetic Permeability 1.0011 1.0011 at 200 oersted (15.9 kA/m)
Curie Temperature -112 °C -170 °F
Thermal Properties
CTE, linear 20°C 13 µm/m-°C 7.22 µin/in-°F 20-100°C
Heat Capacity 0.435 J/g-°C 0.104 BTU/lb-°F
Thermal Conductivity 11.4 W/m-K 79.1 BTU-in/hr-ft²-°F
Melting Point 1260 – 1336 °C 2300 – 2440 °F
Solidus 1260 °C 2300 °F
Liquidus 1336 °C 2440 °F

Inconel 625

Do you need custom Iconel fasteners created with Inconel 625? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for specialty Iconel fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the material properties and technical specifications of the Inconel 625 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 625

Subcategory: Metal; Nickel Base; Superalloy

Key Words: ASME SB-443, SB-444, SB-446, SB-564, Boiler Code Sections I, III, VIII, IX; AFNOR NC 22 D Nb; VdTUV 499, AMS 5581, AMS 5599, AMS 5666, AMS 5837; DIN 17744, 17750-17752, 17754; Werkstoff Nr. 2.4856; NACE MR-01-75, UNS N06625; BS 3072, 3074, 3076 (NA21); ASTM B443, ASTM B444, ASTM B446, ASTM B564, ASTM B704, ASTM B705, ASTM B751

Component Wt. %
Al Max 0.4
C Max 0.1
Co Max 1
Cr 20 – 23
Fe Max 5
Mn Max 0.5
Mo 8 – 10
Nb 3.15 – 4.15
Ni Min 58
P Max 0.015
S Max 0.015
Si Max 0.5
Ti Max 0.4

 

Material Notes:
Niobium content above includes tantalum. A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors. Standard product forms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties Metric English Comments
Density 8.44 g/cc 0.305 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 880 MPa 128000 psi Annealed. Value at room temperature. Value at 650°C is 760 MPa.
Tensile Strength, Yield 460 MPa 66700 psi Annealed. Value at room temperature; 0.2% offset. Value at 650°C is 290 MPa.
Elongation at Break 50 % 50 % Annealed. Value at room temperature. Value at 650°C is 55%.
Electrical Properties
Electrical Resistivity 0.000129 ohm-cm 0.000129 ohm-cm
Magnetic Permeability 1.0006 1.0006 at 200 oersted (15.9 kA/m)
Curie Temperature Max -196 °C Max -321 °F
Thermal Properties
CTE, linear 20°C 12.8 µm/m-°C 7.11 µin/in-°F 20-100°C
Heat Capacity 0.41 J/g-°C 0.098 BTU/lb-°F
Thermal Conductivity 9.8 W/m-K 68 BTU-in/hr-ft²-°F
Melting Point 1290 – 1350 °C 2350 – 2460 °F
Solidus 1290 °C 2350 °F
Liquidus 1350 °C 2460 °F

Blog Search

Search By Material

Search By Application

Get Started

Contact us for a customized fastener solution.

Speak To An Expert

© 2025 All Rights Reserved.