Material Category: Nickel Alloys

Inconel 601

Do you need custom fasteners created with Inconel™ 601? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ 601 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 601

Subcategory: Metal; Nickel Base; Superalloy

Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 – 17752

Component Wt. %
Al 1 – 1.7
C Max 0.1
Cr 21 – 25
Cu Max 1
Fe 13
Mn Max 1
Ni 58 – 63
S Max 0.015
Si Max 0.5

 

Material Notes:
Iron content as remainder. A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles, and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.11 g/cc 0.293 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 760 MPa 110000 psi Solution Annealed. Value at room temperature. Value at 550°C is 620 MPa.
Tensile Strength, Yield 450 MPa 65300 psi Solution Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 330 MPa.
Elongation at Break 42 % 42 % Solution Annealed. Value at room temperature. Value at 550°C is 32%.
Electrical Properties
Electrical Resistivity 0.000119 ohm-cm 0.000119 ohm-cm
Magnetic Permeability 1.003 1.003 at 200 oersted (15.9 kA/m)
Curie Temperature Max -196 °C Max -321 °F
Thermal Properties
CTE, linear 20°C 13.75 µm/m-°C 7.64 µin/in-°F 20-100°C
Heat Capacity 0.448 J/g-°C 0.107 BTU/lb-°F
Thermal Conductivity 11.2 W/m-K 77.7 BTU-in/hr-ft²-°F
Melting Point 1360 – 1411 °C 2480 – 2570 °F
Solidus 1360 °C 2480 °F
Liquidus 1411 °C 2570 °F

Inconel 600

Do you need custom fasteners created with Inconel 600? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for specialty fastener applications. Every Iconel 600 product is built to your specifications, using your prints if necessary.

Below are the material properties and technical specifications sheet of the Inconel 600 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 600

Subcategory: Metal; Nickel Base; Superalloy

Key Words: Inconel 600, ASTM B163, ASTM B166, ASTM B167, ASTM B168, ASTM B366, ASTM B516, ASTM B517, ASTM B564, ASTM B751, ASME SB-163, SB-166 – SB-168, SB-564, Boiler Code Sections I, III, VIII, IX, Nickel-Chromium Alloy, NACE MR-01-75; QQ-W-390; MIL-R-5031, MIL-T-23227, MIL-N-23228, MIL-N-23229; AFNOR NC 15 Fe, SAE AMS 5540, 5580, 5665, 5687, 7232; DIN 17742, 17750 – 17754; Werkstoff Nr. 2.4816; VdTUV 305, UNS N06600; BS 3072 – 3076 (NA14)

Component Wt. %
C Max 0.15
Cr 14 – 17
Cu Max 0.5
Fe 6 – 10
Mn Max 1
Ni Min 72
S Max 0.015
Si Max 0.5

 

Material Notes:
Nickel content above includes cobalt. A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties Metric English Comments
Density 8.47 g/cc 0.306 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 655 MPa 95000 psi Annealed. Value at room temperature. Value at 550°C is 550 MPa.
Tensile Strength, Yield 310 MPa 45000 psi Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 180 MPa.
Elongation at Break 45 % 45 % Annealed. Value at room temperature. Value at 550°C is 42%.
Electrical Properties
Electrical Resistivity 0.000103 ohm-cm 0.000103 ohm-cm
Magnetic Permeability 1.01 1.01 at 200 oersted (15.9 kA/m)
Curie Temperature -194 °C -317 °F
Thermal Properties
CTE, linear 20°C 13.3 µm/m-°C 7.39 µin/in-°F 20-100°C
Heat Capacity 0.444 J/g-°C 0.106 BTU/lb-°F
Thermal Conductivity 14.9 W/m-K 103 BTU-in/hr-ft²-°F
Melting Point 1354 – 1413 °C 2470 – 2580 °F
Solidus 1354 °C 2470 °F
Liquidus 1413 °C 2580 °F

Nickel Alloy G-30

Do you need custom fasteners created with Nickel Alloy G-30? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Nickel Alloy G-30 Bar Stock we have available to meet your needs.

Hastelloy® G-30® alloy, mill annealed

Subcategory: Metal; Nickel Base; Superalloy

Key Words: ASME SB622, ASME SB626, ASME SB366, UNS N06030, ASME SB581, ASME SB582, ASME SB619

Component Wt. %
C Max 0.03
Co Max 5
Cr 28 – 31.5
Cu 1 – 2.4
Fe 13 – 17
Mn Max 1.5
Mo 4 – 6
Ni 43
P Max 0.04
S Max 0.02
Si 0.8
W 1.5 – 4

Material Notes:
Nickel content to balance. Cb and Ta content = 0.3-1.5%. Superior corrosion resistance to commercial phosphoric acids and oxidizing acid mixtures. Typical applications include phosphoric acid service, sulfuric acid service, nitric acid service, nuclear fuel reprocessing, nuclear waste processing, pickling operations, petrochemicals, fertilizer manufacture, pesticide manufacture, and gold ore extraction.

Data provided by the manufacturer, Haynes International, Inc.

Physical Properties Metric English Comments
Density 8.22 g/cc 0.297 lb/in³ at 22°C (72°F)
Mechanical Properties
Hardness, Brinell 128 128 Converted from Rockwell B hardness.
Hardness, Knoop 172 172 Converted from Rockwell B hardness.
Hardness, Rockwell B 90 90
Hardness, Vickers 191 191 Converted from Rockwell B hardness.
Tensile Strength, Ultimate 690 MPa 100000 psi
Tensile Strength, Yield 317 MPa 46000 psi at 0.2% offset
Elongation at Break 64 % 64 % in 50.8 mm
Reduction of Area 77 % 77 %
Modulus of Elasticity 202 GPa 29300 ksi plate heat treated to 1177°C, rapid quenched; 24°C
Modulus of Elasticity at Elevated Temperature 184 GPa 26700 ksi plate heat treated to 1177°C and rapid quenched; 538°C
Modulus of Elasticity at Elevated Temperature 192 GPa 27800 ksi plate heat treated to 1177°C and rapid quenched; 427°C
Modulus of Elasticity at Elevated Temperature 194 GPa 28100 ksi plate heat treated to 1177°C and rapid quenched; 316°C
Modulus of Elasticity at Elevated Temperature 196 GPa 28400 ksi plate heat treated to 1177°C and rapid quenched; 204°C
Charpy Impact 353 J 260 ft-lb mill annealed, 42 J 50% cold rolled, 45 J 50% cold rolled and 1 hour at 500°C (930°F), 15 J 50% cold rolled and 500 hours at 500°C (930°F)
Electrical Properties
Electrical Resistivity 0.000116 ohm-cm 0.000116 ohm-cm 24°C (75°F)
Electrical Resistivity at Elevated Temperature 0.000117 ohm-cm 0.000117 ohm-cm 100°C (212°F)
Electrical Resistivity at Elevated Temperature 0.000119 ohm-cm 0.000119 ohm-cm 200°C (390°F)
Electrical Resistivity at Elevated Temperature 0.000119 ohm-cm 0.000119 ohm-cm 300°C (570°F)
Electrical Resistivity at Elevated Temperature 0.000123 ohm-cm 0.000123 ohm-cm 400°C (750°F)
Electrical Resistivity at Elevated Temperature 0.000124 ohm-cm 0.000124 ohm-cm 500°C (930°F)
Electrical Resistivity at Elevated Temperature 0.000125 ohm-cm 0.000125 ohm-cm 600°C (1110°F)
Thermal Properties
CTE, linear 250°C 14.4 µm/m-°C 8 µin/in-°F 30-316°C
CTE, linear 250°C 14.9 µm/m-°C 8.28 µin/in-°F 30-427°C
CTE, linear 500°C 15.5 µm/m-°C 8.61 µin/in-°F 30-538°C
CTE, linear 500°C 16 µm/m-°C 8.89 µin/in-°F 30-760°C
CTE, linear 500°C 16 µm/m-°C 8.89 µin/in-°F 30-649°C
Thermal Conductivity 10.2 W/m-K 70.8 BTU-in/hr-ft²-°F 24°C
Thermal Conductivity at Elevated Temperature 11.9 W/m-K 82.6 BTU-in/hr-ft²-°F 100°C (212°F)
Thermal Conductivity at Elevated Temperature 14.4 W/m-K 99.9 BTU-in/hr-ft²-°F 200°C (390°F)
Thermal Conductivity at Elevated Temperature 16.7 W/m-K 116 BTU-in/hr-ft²-°F 300°C (570°F)
Thermal Conductivity at Elevated Temperature 18.7 W/m-K 130 BTU-in/hr-ft²-°F 400°C (750°F)
Thermal Conductivity at Elevated Temperature 20.3 W/m-K 141 BTU-in/hr-ft²-°F 500°C (930°F)
Thermal Conductivity at Elevated Temperature 21.4 W/m-K 149 BTU-in/hr-ft²-°F 600°C (1110°F)

Nickel Alloy C276

Do you need custom fasteners created with Nickel Alloy C276? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Nickel Alloy C276 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy C-276

Subcategory: Metal; Nickel Base; Superalloy

Key Words: ASME SB-574, SB-575, SB-619, SB-622, SB-626, Boiler Code Sections I, III, VIII, IX; Werkstoff Nr. 2.4819, Nickel-Chromium Alloy; UNS N10276; ASTM B 574, B 575, B 619, B 622, B 626, B 751; NACE MR-01-75; DIN 17744, 17750-17752

Component Wt. %
C Max 0.01
Co Max 2.5
Cr 14.5 – 16.5
Fe 4 – 7
Mn Max 1
Mo 15 – 17
Ni 55
P Max 0.04
S Max 0.03
Si Max 0.08
V Max 0.35
W 3 – 4.5


Material Notes:
Nickel content as remainder. A nickel-molybdenum-chromium alloy with an addition of tungsten having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. Used in pollution control, chemical processing, pulp and paper production, and waste treatment. Standard product forms are round, forging stock, tube, pipe, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Physical Properties Metric English Comments
Density 8.89 g/cc 0.321 lb/in³
Mechanical Properties
Tensile Strength, Ultimate 790 MPa 115000 psi Annealed. Value at room temperature. Value at 550°C is 620 MPa.
Tensile Strength, Yield 415 MPa 60200 psi Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 230 MPa.
Elongation at Break 62 % 62 % Annealed. Value at room temperature. Value at 550°C is 60%.
Electrical Properties
Electrical Resistivity 0.0001229 ohm-cm 0.0001229 ohm-cm
Magnetic Permeability 1.0002 1.0002 at 200 oersted (15.9 kA/m)
Thermal Properties
CTE, linear 20°C 12.2 µm/m-°C 6.78 µin/in-°F 20-100°C
Heat Capacity 0.427 J/g-°C 0.102 BTU/lb-°F
Thermal Conductivity 9.8 W/m-K 68 BTU-in/hr-ft²-°F
Melting Point 1325 – 1370 °C 2420 – 2500 °F
Solidus 1325 °C 2420 °F
Liquidus 1370 °C 2500 °F

Nickel Alloy B-3

Do you need custom fasteners created with Nickel Alloy B-3? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Nickel Alloy B-3 Bar Stock we have available to meet your needs.

HASTELLOY® B-3® alloy is an additional member of the nickel-molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. It also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. B-3 alloy has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g. HASTELLOY B-2 alloy. B-3 alloy has excellent resistance to pitting corrosion, to stress-corrosion cracking and to knife-line and heat-affected zone attack.

HASTELLOY® B-3 Nickel Alloy

Key Words: HASTELLOY® B-3 Alloy, Nickel Alloy, ASTM, Case 2140, B333, B335, B366, B564, B619 and B622, B626.

Component Wt. %
Nia 65
Mo 28.5
Cr 1.5
Fe 1.5
Co 3*
W 3*
Mn 3*
Al 0.5*
Ti 0.2*
Si 0.1*
C 0.01*

*Maximum

aAs balance

Physical Properties °F British Units °C Metric Units
Density Room 0.333 lb./in.3 Room 9.22 g/cm3
Melting Temperature 2500-2585 1370-1418
Mechanical Properties
Electrical Resistivity Room 53.8 microhm-in. Room 137 microhm-cm
200 53.9 microhm-in. 100 137 microhm-cm
400 54.1 microhm-in. 200 137 microhm-cm
600 54.3 microhm-in. 300 138 microhm-cm
800 54.4 microhm-in. 400 138 microhm-cm
1000 55.4 microhm-in. 500 140 microhm-cm
1200 57.5 microhm-in. 600 143 microhm-cm
1400 54.4 microhm-in. 700 142 microhm-cm
1600 52.6 microhm-in. 800 132 microhm-cm
Mean Coefficient ofThermal Expansion 78-200 5.7 microinches/in.-°F 25-100 10.6 x 10-6 m/m-K
78-400 6.1 microinches/in.-°F 25-200 11.1 x 10-6 m/m-K
78-600 6.3 microinches/in.-°F 25-300 11.4 x 10-6 m/m-K
78-800 6.5 microinches/in.-°F 25-400 11.6 x 10-6 m/m-K
78-1000 6.6 microinches/in.-°F 25-400 11.6 x 10-6 m/m-K
Thermal Properties
Thermal Conductivity Room 78 Btu-in./ft.2-hr.-°F Room 11.2 W/m-K
200 83 Btu-in./ft.2-hr.-°F 100 12.1 W/m-K
400 93 Btu-in./ft.2-hr.-°F 200 13.4 W/m-K
600 104 Btu-in./ft.2-hr.-°F 300 14.8 W/m-K
800 116 Btu-in./ft.2-hr.-°F 400 16.3 W/m-K
1000 129 Btu-in./ft.2-hr.-°F 500 17.9 W/m-K
1200 142 Btu-in./ft.2-hr.-°F 600 19.6 W/m-K
Thermal Diffusivity Room 4.6 x 10-3 in.2/sec. Room 3.0 x 10-3cm2/s
200 4.6 x 10-3 in.2/sec. 100 3.0 x 10-6cm2/s
400 5.4 x 10-3 in.2/sec. 200 3.4 x 10-3cm2/s
600 5.8 x 10-3 in.2/sec. 300 3.7 x 10-3cm2/s
800 6.3 x 10-3 in.2/sec. 400 4.0 x 10-3cm2/s
1000 6.8 x 10-3 in.2/sec. 500 4.4 x 10-3cm2/s
1200 7.3 x 10-3 in.2/sec. 600 4.5 x 10-3cm2/s
1400 7.5 x 10-3 in.2/sec. 700 4.9 x 10-3cm2/s
1600 7.0 x 10-3 in.2/sec. 800 4.7 x 10-3cm2/s
1800 7.4 x 10-3 in.2/sec. 900 4.5 x 10-3cm2/s
1000 4.9 x 10-3cm2/s
Specific Heat Room 0.089 Btu/lb.-°F Room 373 J/kg-K
200 0.092 Btu/lb.-°F 100 382 J/kg-K
400 0.092 Btu/lb.-°F 200 409 J/kg-K
600 0.102 Btu/lb.-°F 300 421 J/kg-K
800 0.104 Btu/lb.-°F 400 431 J/kg-K
1000 0.104 Btu/lb.-°F 500 436 J/kg-K
1200 0.112 Btu/lb.-°F 600 434 J/kg-K

References are available for this material.

Nickel Alloy B2

Do you need custom fasteners created with Nickel Alloy B-2? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Nickel Alloy B-2 Bar Stock we have available to meet your needs.

HASTELLOY® B-2 alloy is a nickel-base wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. It also withstands hydrogen chloride, sulfuric, acetic and phosphoric acids. The alloy has excellent resistance to pitting, to stress-corrosion cracking and to knife-line and heat-affected zone attack. It resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

HASTELLOY® B-2 Nickel Alloy

Key Words: HASTELLOY® B-2 Alloy, SB-333, SB-335, SB-619, SB-622 and SB-626 under UNS number N10665.

Component Wt. %
Nia 69
Mo 28
Fe 2*
Co 1*
Cr 1*
Mn 1*
Si 1
C 0.01*

*Maximum

aAs balance

Physical Properties °F British Units °C Metric Units
Density 72 0.333 lb./in.3 22 9.22 g/cm3
Mechanical Properties
Electrical Resistivity 32 54.1 microhm-in. 0 1.37 microhm-m
212 54.3 microhm-in. 100 1.38 microhm-m
392 54.5 microhm-in. 200 1.38 microhm-m
572 54.6 microhm-in. 300 1.39 microhm-m
752 54.8 microhm-in. 400 1.39 microhm-m
932 55.6 microhm-in. 500 1.41 microhm-m
1112 57.6 microhm-in. 600 1.46 microhm-m
Mean Coefficient ofThermal Expansion 68-200 5.7 microinches/in.-°F 20-93 10.3 x 10-6 m/m-K
68-400 6.0 microinches/in.-°F 20-204 10.8 x 10-6 m/m-K
68-600 6.2 microinches/in.-°F 20-316 11.2 x 10-6 m/m-K
68-800 6.4 microinches/in.-°F 20-427 11.5 x 10-6 m/m-K
68-1000 6.5 microinches/in.-°F 20-538 11.7 x 10-6 m/m-K
Thermal Properties
Thermal Conductivity 32 77 Btu-in./ft.2-hr.-°F 0 11.1 W/m-K
212 85 Btu-in./ft.2-hr.-°F 100 12.2 W/m-K
392 93 Btu-in./ft.2-hr.-°F 200 13.4 W/m-K
572 102 Btu-in./ft.2-hr.-°F 300 14.6 W/m-K
752 111 Btu-in./ft.2-hr.-°F 400 16.0 W/m-K
932 120 Btu-in./ft.2-hr.-°F 500 17.3 W/m-K
1112 130 Btu-in./ft.2-hr.-°F 600 18.7 W/m-K
Thermal Diffusivity 32 0.005 in.2/sec. 0 3.2 x 10-6m2/s
212 0.005 in.2/sec. 100 3.4 x 10-6m2/s
392 0.006 in.2/sec. 200 3.6 x 10-6m2/s
572 0.006 in.2/sec. 300 3.8 x 10-6m2/s
752 0.006 in.2/sec. 400 4.0 x 10-6m2/s
932 0.007 in.2/sec. 500 4.2 x 10-6m2/s
1112 0.007 in.2/sec. 600 4.5 x 10-6m2/s
Specific Heat 32 0.089 Btu/lb.-°F 0 373 J/kg-K
212 0.093 Btu/lb.-°F 100 389 J/kg-K
392 0.097 Btu/lb.-°F 200 406 J/kg-K
572 0.101 Btu/lb.-°F 300 423 J/kg-K
752 0.103 Btu/lb.-°F 400 431 J/kg-K
932 0.106 Btu/lb.-°F 500 444 J/kg-K
1112 0.109 Btu/lb.-°F 600 456 J/kg-K

References are available for this material.

Blog Search

Search By Material

Search By Application

Get Started

Contact us for a customized fastener solution.

Speak To An Expert

© 2025 All Rights Reserved.