Do you need custom fasteners created with Haynes™ HR-120? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Haynes™ HR-120 Bar Stock we have available to meet your needs.

Haynes® HR-120™ alloy, solution heat-treated

Subcategory: Iron Base; Metal; Superalloy Key Words: ASTM B514, ASTM B407, ASTM B515, ASTM B564, ASTM B366, DIN No.2.4854, UNS N08120, ASTM B163, ASTM B408, ASTM B409

Material Notes: Excellent strength at elevated temperatures, combined with good resistance to carburizing and sulfidizing environments. Applications include bar frame heat treating baskets, wire mesh furnace belts and basket liners, muffles and retorts, heat treating fixtures, waste incinerators, radiant tubes, cast link belt pins, recuperators, and fluidized bed components.

Data provided by the manufacturer, Haynes International, Inc.

Do you need custom fasteners created with Ferralium 255? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Do you need custom fasteners created with Ferralium 255? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Ferralium 255 Bar Stock we have available to meet your needs.

Ferralium Alloy 255 solution treated at 1120°C, cooled rapidly, 19-25 mm

Subcategory: Heat Resisting; Metal; Stainless Steel

Material Notes: Patented, ferritic-austenitic; high mechanical strength, ductility, and hardness with resistance to corrosion and erosion. Excellent resistance to acids and salts. Duplex alloy with nearly equal portions of austenite and ferrite-matrix phases. Applications include pumps, agitators, valves, and piping for handling wet phosphoric acid slurries, marine scrubbers, pumps and seals, and acid handling equipment.

References are available for this material.

This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2014 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.

Do you need custom fasteners created with Custom 450? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Custom 450 Bar Stock we have available to meet your needs.

Carpenter Custom 450® Stainless Steel, Annealed

Subcategory: Metal; Stainless Steel; T 400 Series Stainless Steel Key Words: UNS S45000; Carpenter Technology Corporation, Carpenter Steel Division; Cartech

Material Notes: Iron content calculated as remainder; minimum niobium (columbium) content 8 x C. Data provided by Carpenter Technology Corporation.

Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance (similar to that of Stainless Type 304) with moderate strength (similar to that of Stainless Type 410). the alloy has a yield strength somewhat greater than 100 ksi (689 MPa) in the annealed condition, but is easily fabricated. A single-step aging treatment develops higher strength with good ductility and toughness. This stainless can be machined, hot-worked, and cold-formed in the same manner as other martensitic age-hardenable stainless steels. A particular advantage is ease of welding and brazing. Custom 450 stainless is generally supplied in the annealed condition, requiring no heat treatment by the user for many applications. Because it has corrosion resistance like Type 304 stainless but three times the yield strength, it has been used in applications where Type 304 was not strong enough. On the other hand, it has also replaced Type 410 stainless directly on a strength basis where Type 410 had insufficient corrosion resistance. Mechanical properties will depend on the aging temperature selected.

Custom 450® is a registered trademark of Carpenter Technology Corporation.

Do you need custom fasteners created with Columbium? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Columbium Bar Stock we have available to meet your needs.

Niobium, Nb (Columbium, Cb); Cold-Worked

Subcategory: Metal; Niobium Alloy; Nonferrous Metal; Pure Metallic Element

Material Notes: Cold-worked applies only to tensile and/or hardness values; other property values are typical of the element. The name niobium is used by chemists but the element is generally called columbium by American metallurgists. Fabrication: good formability, work hardens slowly, cannot be soldered. Joining requires adhesives, rivets, nuts and bolts, or capacitive discharge welding. Applications: used in aerospace applications (i.e. rocket boosters), sodium vapor lamps, and superconductors.

References are available for this material.

Do you need custom fasteners created with Carpenter™ 21-12N? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Carpenter™ 21-12N Bar Stock we have available to meet your needs.

Carpenter™ 21-12N Stainless Steel, Bar

Subcategory: Metal; Stainless Steel;

Key Words: Carpenter Technology Corporation, Carpenter Steel Division; Cartech,

Material Notes: This alloy has been used as the head material in two-piece exhaust valves for both diesel and gasoline engines. It offers excellent high temperature strength and hardness as well as corrosion resistance to combustion products.Machinability : Machinability properties are comparable to the standard 18-8 stainless alloys.

Do you need custom fasteners created with Carpenter™ 20/CB3? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Carpenter™ 20/CB3 Bar Stock we have available to meet your needs.

Carpenter 20Cb-3® Stainless Steel, Bar

Subcategory: Metal; Stainless Steel; T 300 Series Stainless Steel Key Words: ASTM B472; ASTM B473; ASTM B474ASTM B471; ASTM B472; ASTM B473; ASTM B474; ASTM B475; ASTM B729, Carpenter Technology Corporation, Carpenter Steel Division; Cartech, UNS N08020; NACE MR0175; ASTM A265; ASTM B366; ASTM B462; ASTM B463; ASTM B464; ASTM B468; ASTM B471

Material Notes: Iron content calculated as remainder; minimum niobium (columbium) content 8 x C. Data provided by Carpenter Technology Corporation.

20Cb-3 ® is an austenitic stainless steel possessing excellent resistance to hot sulfuric acid and many other aggressive environments which would readily attack Type 316 stainless. This alloy exhibits superior resistance to stress-corrosion cracking in boiling 20 to 40% sulfuric acid. 20Cb-3 stainless is also stabilized to limit intergranular attack, even in the sensitized condition. Corrosion tests on annealed and sensitized material conducted in the Ferric Sulfate – 50% Sulfuric Acid Test resulted in rates of 0.002 inches per month maximum. Important advantages of 20Cb-3 stainless are its excellent mechanical properties and comparative ease of fabrication. The presence of columbium in the alloy minimizes the precipitation of carbides during welding. Assemblies usually have been placed in service in the as-welded condition.

This material has found wide use in all phases of the chemical and allied industries. It has been used extensively in the processing of synthetic rubber, high-octane gasoline, solvents, explosives, plastics, synthetic fibers, heavy chemicals, organic chemicals, pharmaceuticals, and agrichemicals. 20Cb-3 stainless has also been used in SO2 scrubbers where acid content, such as sulfuric acid, is of more concern than high-halogen content, such as chlorides. Other applications have included use in fans, mixing tanks, agitators, distillation towers, heat exchangers, process piping, bubble caps, metal cleaning and pickling tanks, spray pickling equipment, pump shafts and rods, valve stems, bolts, nuts, washers, tie rods, continuous-line pickling equipment including racks, etc.

20Cb-3® is a registered trademark of Carpenter Technology Corporation.

Do you need custom fasteners created with Avesta 2205? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Avesta 2205 Bar Stock we have available to meet your needs.

AK Steel Duplex Stainless Steel 2205

Subcategory: Alloy Steel; Metal; Stainless Steel Close Analogs: Iron content calculated as remainder

Material Notes: AK Steel 2205 provides a combination of high strength, excellent corrosion resistance and stress-corrosion cracking resistance as well as very good pitting resistance, and low thermal expansion. The alloy is useful in a variety of applications that include heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper production equipment, oilfield equipment and press rolls.

Information provided by AK Steel

Do you need custom fasteners created with Avesta 254 SMO? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Avesta 254 SMO Bar Stock we have available to meet your needs.

Indalloy® 254 86.9Sn/10.0In/3.1Ag Lead-Free Solder Alloy

Subcategory: Indium Alloy; Metal; Nonferrous Metal; Solder/Braze Alloy; Tin Alloy

Material Notes: No Sn/In eutectic problem; potential use for flip chip assembly.

Information provided by the manufacturer, Indium Corporation of America.

Do you need custom fasteners created with Alloy 60? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Alloy 60 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 600

Subcategory: Metal; Nickel Base; Superalloy Key Words: Inconel 600, ASTM B163, ASTM B166, ASTM B167, ASTM B168, ASTM B366, ASTM B516, ASTM B517, ASTM B564, ASTM B751, ASME SB-163, SB-166 – SB-168, SB-564, Boiler Code Sections I, III, VIII, IX, Nickel-Chromium Alloy, NACE MR-01-75; QQ-W-390; MIL-R-5031, MIL-T-23227, MIL-N-23228, MIL-N-23229; AFNOR NC 15 Fe, SAE AMS 5540, 5580, 5665, 5687, 7232; DIN 17742, 17750 – 17754; Werkstoff Nr. 2.4816; VdTUV 305, UNS N06600; BS 3072 – 3076 (NA14)

Material Notes: Nickel content above includes cobalt. A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Do you need custom fasteners created with Alloy 50? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Alloy 50 Bar Stock we have available to meet your needs.

Carpenter Hiperco® Alloy 50 Fe-Co-V Soft Magnetic Alloy, Cold Rolled

Subcategory: Cobalt Alloy; Electronic/Magnetic Alloy; Metal Key Words: ASTM A801 Alloy Type 1; Mil-A-47182; Carpenter Technology Corporation, Carpenter Steel Division; Cartech

Material Notes: Iron content calculated as remainder.

Hiperco® alloy 50 is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (24 kilogauss), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. This alloy is produced in strip form only and contains a small niobium addition for grain refinement during mill processing and final heat treatment of strip.

Hiperco alloy 50 strip has been used primarily in the manufacture of rotor and stator laminations in motors and generators for aircraft power generation applications. These laminations are stamped from cold rolled strip and must be final annealed in a protective atmosphere or vacuum environment at a temperature which will provide and optimum combination of mechanical and magnetic properties to withstand the high stresses encountered in service.

Hiperco 50 has the same nominal composition as Vanadium Permendur and Permendur V.

Hiperco® is a registered trademark of Carpenter Technology Corporation. Data provided by Carpenter Technology Corporation.