Do you need custom fasteners or bolts created with A286? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for A286 fastener and A286 bolt applications. Every A286 product is built to your specifications, using your prints if necessary.
Below are the material properties and technical specifications of the A286 bar stock we have available to meet your needs.
Special Metals INCO® A286 Iron-Nickel-Chromium Alloy
Subcategory: Iron Base; Metal; Superalloy
| Component | Wt. % |
| Al | Max 0.35 |
| B | 0.001 – 0.01 |
| C | Max 0.08 |
| Cr | 13.5 – 16 |
| Fe | 60 |
| Mn | Max 2 |
| Mo | 1 – 1.5 |
| Ni | 24 – 27 |
| S | Max 0.03 |
| Ti | 1.9 – 2.35 |
| V | 0.1 – 0.5 |
| W | 3 -4.5 |
Material Notes: Iron content calculated as remainder.
Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
| Density | 7.94 g/cc | 0.287 lb/in³ | |
| Mechanical Properties | |||
| Modulus of Elasticity | 201 GPa | 29200 ksi | |
| Electrical Properties | |||
| Electrical Resistivity | 9.1e-005 ohm-cm | 9.1e-005 ohm-cm | |
| Magnetic Permeability | 1.007 | 1.007 | at 200 Oersted (15.9 kA/m) |
| Thermal Properties | |||
| CTE, linear 20°C | 16.4 µm/m-°C | 9.11 µin/in-°F | Mean 27-100°C |
| CTE, linear 250°C | 16.9 µm/m-°C | 9.39 µin/in-°F | Mean 27-300°C |
| CTE, linear 500°C | 17.5 µm/m-°C | 9.72 µin/in-°F | Mean 27-500°C |
| CTE, linear 1000°C | 17.7 µm/m-°C | 9.83 µin/in-°F | Mean 27-700°C |
| Heat Capacity | 0.419 J/g-°C | 0.1 BTU/lb-°F | |
| Thermal Conductivity | 12.7 W/m-K | 88.1 BTU-in/hr-ft²-°F | |
| Melting Point | 1370 – 1430 °C | 2500 – 2610 °F | |
| Solidus | 1370 °C | 2500 °F | |
| Liquidus | 1430 °C | 2610 °F | |
| Maximum Service Temperature, Air | 700 °C | 1290 °F | good strength and oxidation resistance |
