Do you need custom fasteners created with AL6XN? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the AL6XN Bar Stock we have available to meet your needs.


Subcategory: The physical properties of the AL-6XN alloy are similar to those of other austenitic stainless steels Uses for AL6XNOriginally developed for seawater applications, the AL-6XN alloy is used successfully in food, pharmaceutical, and biopharmaceutical services. The “superalloy” is resistant to attack by corrosive food and beverage products such as: sports drinks, ketchups, soy and barbecue sauces, and salsas.
It is also successful with fine chemical, cosmetic and pharmaceutical (cosmeceutical), bulk pharmaceutical, brewery, desalination, semi-conductor, aerospace, biopharm, pulp and paper, and gas handling applications.

Component Wt. %
Chromium 20%
Nickel 24%
Molybdenum 6.3%
Nitrogen 36
Mn .22%
Copper .25% – .75%
PREN 44.3

Material Notes: AL-6XN alloy is metallurgically stable to 1000° F (540° C) and has no phase transformation even after extensive deformation. When exposed to temperatures in the range of 1200-1800° F the opportunity for chi phase formations exists. Chi phase, a chromium-iron-molybdenum compound which is sometimes incorrectly referred to as sigma phase, forms along the grain boundaries depleting the area of molybdenum and chromium reducing the corrosion resistance of the material. In order to help combat chi phase formation, nitrogen was added to the AL-6XN alloy to minimize this formation improving corrosion resistance and increasing strength over a broad range of temperatures, while maintaining the good formability of austenitic stainless steel.

Physical Properties Value Units Comments
Density 0.291
lb/in3 g/cm3
Mechanical Properties
Modulus of Elasticity 28.3 x 106195 psiGPa
Melting Range 2410 to 2550 ºF
Coefficient of Expansion
68 to 212 °F
20 to 100 °C
10-6/ °F
10-6/ °C
Modulus of Elasticity 193 GPa 28000 ksi In Tension
Sealing Temperature 1885
Electrical Properties
Electrical Resistivity 535
Ohm·circ mil/ft
Magnetic Permeability 1.0028
(µ at 200H)
Fully annealed 0.5″ plate 65% cold-worked plate
Thermal Properties
Specific Heat Capacity 0.11