Inconel 600

Do you need custom fasteners created with Inconel 600? Since our inception, Vegas Fastener Group has met every challenge of providing quality, timely, cost-effective solutions for specialty fastener applications. Every Iconel 600 product is built to your specifications, using your prints if necessary.

Below are the material properties and technical specifications sheet of the Inconel 600 Bar Stock we have available to meet your needs.

Special Metals INCONEL® Alloy 600

Subcategory: Metal; Nickel Base; Superalloy

Key Words: Inconel 600, ASTM B163, ASTM B166, ASTM B167, ASTM B168, ASTM B366, ASTM B516, ASTM B517, ASTM B564, ASTM B751, ASME SB-163, SB-166 – SB-168, SB-564, Boiler Code Sections I, III, VIII, IX, Nickel-Chromium Alloy, NACE MR-01-75; QQ-W-390; MIL-R-5031, MIL-T-23227, MIL-N-23228, MIL-N-23229; AFNOR NC 15 Fe, SAE AMS 5540, 5580, 5665, 5687, 7232; DIN 17742, 17750 – 17754; Werkstoff Nr. 2.4816; VdTUV 305, UNS N06600; BS 3072 – 3076 (NA14)

Component	Wt. %
C	Max 0.15
Cr	14 – 17
Cu	Max 0.5
Fe	6 – 10
Mn	Max 1
Ni	Min 72
S	Max 0.015
Si	Max 0.5

Material Notes:
Nickel content above includes cobalt. A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup’s inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical Properties	Metric	English	Comments
Density	8.47 g/cc	0.306 lb/in³
Mechanical Properties
Tensile Strength, Ultimate	655 MPa	95000 psi	Annealed. Value at room temperature. Value at 550°C is 550 MPa.
Tensile Strength, Yield	310 MPa	45000 psi	Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 180 MPa.
Elongation at Break	45 %	45 %	Annealed. Value at room temperature. Value at 550°C is 42%.
Electrical Properties
Electrical Resistivity	0.000103 ohm-cm	0.000103 ohm-cm
Magnetic Permeability	1.01	1.01	at 200 oersted (15.9 kA/m)
Curie Temperature	-194 °C	-317 °F
Thermal Properties
CTE, linear 20°C	13.3 µm/m-°C	7.39 µin/in-°F	20-100°C
Heat Capacity	0.444 J/g-°C	0.106 BTU/lb-°F
Thermal Conductivity	14.9 W/m-K	103 BTU-in/hr-ft²-°F
Melting Point	1354 – 1413 °C	2470 – 2580 °F
Solidus	1354 °C	2470 °F
Liquidus	1413 °C	2580 °F

Special Metals INCONEL® Alloy 600

Other Nickel Alloys

Find by Material Classifications

Get Started