Do you need custom fasteners created with Inconel™ 601? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Inconel™ 601 Bar Stock we have available to meet your needs.
Special Metals INCONEL® Alloy 601
Subcategory: Metal; Nickel Base; Superalloy
Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 – 17752
| Component |
Wt. % |
| Al |
1 – 1.7 |
| C |
Max 0.1 |
| Cr |
21 – 25 |
| Cu |
Max 1 |
| Fe |
13 |
| Mn |
Max 1 |
| Ni |
58 – 63 |
| S |
Max 0.015 |
| Si |
Max 0.5 |
Material Notes:
Iron content as remainder. A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles, and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.
Data provided by the manufacturer, Special Metals.
| Physical Properties |
Metric |
English |
Comments |
| Density |
8.11 g/cc |
0.293 lb/in³ |
|
| Mechanical Properties |
| Tensile Strength, Ultimate |
760 MPa |
110000 psi |
Solution Annealed. Value at room temperature. Value at 550°C is 620 MPa. |
| Tensile Strength, Yield |
450 MPa |
65300 psi |
Solution Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 330 MPa. |
| Elongation at Break |
42 % |
42 % |
Solution Annealed. Value at room temperature. Value at 550°C is 32%. |
| Electrical Properties |
| Electrical Resistivity |
0.000119 ohm-cm |
0.000119 ohm-cm |
|
| Magnetic Permeability |
1.003 |
1.003 |
at 200 oersted (15.9 kA/m) |
| Curie Temperature |
Max -196 °C |
Max -321 °F |
|
| Thermal Properties |
| CTE, linear 20°C |
13.75 µm/m-°C |
7.64 µin/in-°F |
20-100°C |
| Heat Capacity |
0.448 J/g-°C |
0.107 BTU/lb-°F |
|
| Thermal Conductivity |
11.2 W/m-K |
77.7 BTU-in/hr-ft²-°F |
|
| Melting Point |
1360 – 1411 °C |
2480 – 2570 °F |
|
| Solidus |
1360 °C |
2480 °F |
|
| Liquidus |
1411 °C |
2570 °F |
|
|
