Do you need custom fasteners created with Inconel™ 800/800H? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Inconel™ 800/800H Bar Stock we have available to meet your needs.
Typical applications for alloy 800 and 800H are – Heat exchangers and process piping; carburizing fixtures and retorts; furnace components; electric range heating-element sheathing; extruded tubing for ethylene and steam methane reforming furnaces; ammonia effluent coolers.
Inconel™ ALLOY 800/800H
*Maximum aAs balance |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Physical Properties | °F | British Units | °C | Metric Units |
| Density | Room | 0.287 lb./in.3 | Room | 7.95 g/cm3 |
| Dynamic Modulus of Elasticity | Room | 28.5 x 106 psi | Room | 196 GPa |
| Mechanical Properties | ||||
| Electrical Resistivity | 70 | 38.9 microhm-in. | 21 | 0.989 microhm-m |
| 200 | 40.6 microhm-in. | 93 | 10.3 microhm-m | |
| 400 | 43.0 microhm-in. | 204 | 1.09 microhm-m | |
| 600 | 44.7 microhm-in. | 316 | 1.13 microhm-m | |
| 800 | 46.1 microhm-in. | 427 | 1.17 microhm-m | |
| Mean Coefficient ofThermal Expansion | 70-200 | 7.9 microinches/in.-°F | 21-93 | 14.2 x 10-6 m/m-K |
| 70-400 | 8.8 microinches/in.-°F | 21-204 | 15.8 x 10-6 m/m-K | |
| 70-600 | 9.0 microinches/in.-°F | 21-316 | 16.2 x 10-6 m/m-K | |
| 70-800 | 9.2 microinches/in.-°F | 21-427 | 16.6 x 10-6 m/m-K | |
| Thermal Properties | ||||
| Thermal Conductivity | 70 | 80 Btu-in./ft.2-hr.-°F | 21 | 11.5 W/m-K |
| 200 | 89 Btu-in./ft.2-hr.-°F | 93 | 12.8 W/m-K | |
| 400 | 103 Btu-in./ft.2-hr.-°F | 204 | 14.8 W/m-K | |
| 600 | 115 Btu-in./ft.2-hr.-°F | 316 | 16.6 W/m-K | |
| 800 | 127 Btu-in./ft.2-hr.-°F | 427 | 18.3 W/m-K | |
