Do you need custom fasteners created with Naval Brass 464? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Naval Brass 464 Bar Stock we have available to meet your needs.
Uninhibited Naval brass, UNS C46400
Subcategory: Brass; Copper Alloy; Metal; Nonferrous Metal Key Words: CDA 464, CZ133, CZ113, ISO CuZn39Sn1, CEN CW719R, UNS C46700
| Component | Wt. % |
| Cu | 59 – 62 |
| Fe | Max 0.1 |
| Pb | Max 0.2 |
| Sn | 0.5 – 1 |
| Zn | 39.25 |
Material Notes: Fair to excellent corrosion resistance. Excellent hot workability and hot forgeability. Fabricated by blanking, drawing, bending, heading and upsetting, hot forging, pressing. Applications: aircraft turnbuckle barrels, balls, bolts, marine hardware, nuts, propeller shafts, rivets, valve stems, condenser plates, welding rod.
Available as flat products, rod, shape, and tube.
| Physical Properties | Metric | English | Comments |
| Density | 8.41 g/cc | 0.304 lb/in³ | at 20°C (68°F) |
| Mechanical Properties | |||
| Tensile Strength, Ultimate | 379 – 607 MPa | 55000 – 88000 psi | |
| Tensile Strength, Yield | 172 – 455 MPa | 24900 – 66000 psi | Depending on temper |
| Elongation at Break | 50 % | 50 % | in 431.8 mm. |
| Modulus of Elasticity | 100 GPa | 14500 ksi | |
| Poisson’s Ratio | 0.28 | 0.28 | Calculated |
| Machinability | 30 % | 30 % | UNS C36000 (free-cutting brass) = 100% |
| Shear Modulus | 39 GPa | 5660 ksi | |
| Thermal Properties | |||
| CTE, linear 250°C | 21.2 µm/m-°C | 11.8 µin/in-°F | from 20-300°C (68-570°F) |
| Thermal Conductivity | 116 W/m-K | 805 BTU-in/hr-ft²-°F | at 20°C (68°F) |
| Melting Point | 885 – 900 °C | 1630 – 1650 °F | |
| Solidus | 885 °C | 1630 °F | |
| Liquidus | 900 °C | 1650 °F | |
References are available for this material.
