Do you need custom fasteners created with Phosphorous Bronze 510? Since our inception, Vegas Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Phosphorous Bronze 510 Bar Stock we have available to meet your needs.
Phosphor bronze 8% C, UNS C52100, H02 Temper rod
Subcategory: Bronze; Copper Alloy; Metal; Nonferrous Metal Key Words: CDA 521, PB104, ISO CuSn8P
Component | Wt. % |
Cu | 90.5 – 92.8 |
Fe | Max 0.1 |
P | 0.03 – 0.35 |
Pb | Max 0.05 |
Sn | 7 – 9 |
Zn | Max 0.2 |
Material Notes: Good to excellent corrosion resistance. Good cold workability for blanking, drawing, forming and bending, shearing and stamping. Applications: more severe service conditions than C51000.
Trace content of Phosphorus.
Test specimen: rod – 13mm diameter.
Physical Properties | Metric | English | Comments |
Density | 8.8 g/cc | 0.318 lb/in³ | at 20°C (68°F) |
Mechanical Properties | |||
Hardness, Rockwell B | 85 | 85 | |
Tensile Strength, Ultimate | 550 MPa | 79800 psi | |
Tensile Strength, Yield | 450 MPa | 65300 psi | |
Elongation at Break | 33 % | 33 % | in 50 mm |
Modulus of Elasticity | 110 GPa | 16000 ksi | |
Poisson’s Ratio | 0.341 | 0.341 | |
Machinability | 20 % | 20 % | UNS C36000 (free-cutting brass) = 100% |
Shear Modulus | 41 GPa | 5950 ksi | |
Electrical Properties | |||
Electrical Resistivity | 1.33e-005 ohm-cm | 1.33e-005 ohm-cm | at 20°C (68°F) |
Thermal Properties | |||
CTE, linear 250°C | 18.2 µm/m-°C | 10.1 µin/in-°F | from 20-300°C (68-570°F) |
Heat Capacity | 0.38 J/g-°C | 0.0908 BTU/lb-°F | |
Thermal Conductivity | 62 W/m-K | 430 BTU-in/hr-ft²-°F | at 20°C (68°F) |
Melting Point | 880 – 1025 °C | 1620 – 1880 °F | |
Solidus | 880 °C | 1620 °F | |
Liquidus | 1025 °C | 1880 °F | |
Processing Properties | |||
Annealing Temperature | 475 – 675 °C | 887 – 1250 °F |